Under-nose payload
Fit a payload beneath the Matrice 400 on its own connector.
Matrice 400 accessory
DJI Matrice 400 Third Gimbal Connector
A connector that mounts a third payload under the Matrice 400 through the E3 or E4 port of the E-Port V2.
S$208
Compatible with DJI Matrice 400 via E-Port V2 E3 or E4
3 kgPayload limit on the quick-release port
6 kgPayload limit with screw-lock fastening
E3 / E4E-Port V2 port it connects to
4 × M3Screws supplied
Overview
What the DJI Matrice 400 Third Gimbal Connector is for.
Payload connector that adds a third gimbal position under the Matrice 400 through the E3 or E4 port of the E-Port V2.
Starting priceS$208incl. 9% GST · Free delivery in Singapore · Usually delivered in 7–14 working days
- 01
Connects to the E3 or E4 port of the E-Port V2 to mount a payload under the Matrice 400.
- 02
Supports 3 kg on the quick-release port and 6 kg with screw-lock fastening.
- 03
Waterproof rating depends on the attached payload.
- 04
Installed with the device switched off.
Compatibility
DJI Matrice 400 with an E-Port V2 E3 or E4 port. The payload is sold separately.
Third gimbal connector fitted to the underside of a Matrice 400. The aircraft is sold separately.
Included items
What is included.
Reference items for this product.
DJI Matrice 400 Third Gimbal Connector2 reference item typesDJI Matrice 400 Third Gimbal Connector
- Third Gimbal Connector× 1
- M3 Screw× 4
The aircraft and payload shown in photographs are not included. MIRS confirms the final contents and any regional variation when you enquire.
Workflow
Where it fits your workflow.
Quick-release mounting
Use the quick-release port for payloads up to 3 kg.
Screw-lock mounting
Fasten heavier payloads up to 6 kg with screw lock.
Essential information
Technical details
Mounting
- Quick-release port payload
- Up to 3 kg
- Screw-lock payload
- Up to 6 kg
- Connection
- E3 or E4 port of the E-Port V2
- Water resistance
- Depends on the attached payload
MIRS product support
Plan your DJI Matrice 400 Third Gimbal Connector setup with MIRS.
Confirm compatibility, availability and regional requirements with our team before ordering.
Need a specific answer?
Frequently asked questions
What does it connect to?
The E3 or E4 port of the E-Port V2 on a DJI Matrice 400.
What payload weight can it carry?
Up to 3 kg through the quick-release port and up to 6 kg with screw-lock fastening.
What is its water rating?
It depends on the payload fitted, so refer to the attached payload's rating.
Is there anything to know before fitting it?
Install the connector while the device is switched off.
Can I order it online?
Ordering follows an availability check. Choose your setup and MIRS confirms stock, delivery eligibility and terms.
DJI Matrice 400 Third Gimbal Connector
Ready to choose your setup?
Confirm the details and set the quantity.
Browse this category
More in Accessories
More products from this catalogue category. Confirm fit with MIRS.
Matrice 400 powerDJI Enterprise
Available to orderDJI TB100 Intelligent Flight Battery
Intelligent flight battery for the DJI Matrice 400. Battery quantity, transport treatment and availability are confirmed with each enquiry.
S$2,288incl. 9% GST · Free delivery in Singapore · Usually delivered in 7–14 working days
Matrice 400 powerDJI Enterprise
Available to orderDJI BS100 Battery Station
A portable charging station for the Matrice 400 power system, with dedicated channels for TB100 flight batteries and WB37 controller batteries.
S$1,788incl. 9% GST · Free delivery in Singapore · Usually delivered in 7–14 working days
Matrice 400 accessoryDJI Enterprise
Available to orderM400 Dual Gimbal Connector
Mount two compatible payloads beneath the nose of DJI Matrice 400 through an E1 or E2 E-Port V2 connection.
S$338incl. 9% GST · Free delivery in Singapore · Usually delivered in 7–14 working days